Filter
Top Products
System Configuration Flags
Polycom®, Inc. 777
To add a flag:
1 In the System Flags dialog, click New Flag.
The New Flag dialog box is displayed.
2 In the New Flag field enter the flag name.
3 In the Value field enter the flag value.
The flags in the Manually Added, Modified, Deleted System Flags table can be manually added
to the MCMS_PARAMETERS_USERS
tab.
4 Click OK to close the New Flag dialog.
The new flag is added to the flags list.
5 Click OK to close the System Flags dialog.
:
Unless indicated otherwise, reset the MCU is required for flag changes (including deletion) to take
effect. For more information see Resetting the Collaboration Server.
Manually Added, Modified, Deleted System Flags
Flag Description
ACCEPT_VOIP_DTMF_TYPE Defines the type of DTMF tones (inband) or digits (outband) that the
Collaboration Server will accept in VOIP calls.
Range:
•0 - Auto (default):
Inband or outband DTMF tones/digits are accepted depending on the
endpoint's current setting. If the endpoint switches from inband to
outband, and vice versa, the value of the
SET_DTMF_SOURCE_DIFF_IN_SEC flag determines the time interval
after which both inband and outband tones/digits will be accepted.
•1 - Outband (H.245) only
•2 - Inband only