Filter
Top Products
System Configuration Flags
Polycom®, Inc. 773
NUMERIC_CONF_ID_MAX_LEN The maximum number of digits that the user can enter when manually
assigning an ID to a conference.
Range: 2-16 (Default: 8)
Note: Selecting 2 limits the number of simultaneous ongoing conferences
to 99.
NUMERIC_CONF_ID_MIN_LEN The minimum number of digits that the user must enter when manually
assigning an ID to a conference.
Range: 2-16 (Default: 4)
Note: Selecting 2 limits the number of simultaneous ongoing conferences
to 99.
NUMERIC_CONF_PASS_DEFAULT
_LEN
This flag enables or disables the automatic generation of conference
passwords and determines the number of digits in the conference
passwords assigned by the MCU.
Possible values are:
•0 disables the automatic password generation in both Standard Security
Mode or Ultra Secure Mode.
Any value other than 0 enables the automatic generation of conference
passwords if the flag HIDE_CONFERENCE_PASSWORD is set to NO.
• 1 – 16, default: 6 (Standard Security Mode)
• 9 – 16, default: 9 (Ultra Secure Mode).
If the default is used, in non-secured mode the system will automatically
generate conference passwords that contain 6 characters.
NUMERIC_CONF_PASS_MAX_LE
N
The maximum number of digits that the user can enter when manually
assigning a password to the conference.
Range:
• 0 – 16 (Standard Security Mode)
• 9 – 16 (Ultra Secure Mode).
Default (both Modes): 16
NUMERIC_CONF_PASS_MIN_LEN Defines the minimum length required for the Conference password.
Value: 0-16
Default:
•0 - (Standard Security Mode) this rule is not enforced. However this rules
cannot be disabled when the Collaboration Server is in Ultra Secure
Mode.
•9 - (Ultra Secure Mode) Conference password must be at least 9
characters in length (default).
MCMS_PARAMETERS_USER Flags
Flag Description