Filter
Top Products
Event Reporting and U-Abort Capabilities
3-50 Issue 7 May 1998
Reconnected Event Report
This event report is generated under the following circumstances:
■ When an on-ECS station connects to a call that has been previously placed
on hold. Reconnecting to a held call can be done either manually at the
station (by reselecting the active call appearance or switch hook flash) or
via a Third Party Reconnect capability.
NOTE:
An association requesting Third Party Reconnect capability (the
association over which the capability was requested) receives an
acknowledgement and does not receive a Reconnected Event
Report. Event reports are sent over the other associations monitoring
and/or controlling the call.
Reconnected Event Report Items
The following is a list of items provided with this report:
connected party number
The extension that has been reconnected to the call
call_id
This ECS-assigned call identifier is used to associate event reports to calls and
identify a call the adjunct wants to control. The call identifier is unique within the
ECS.
party_id
The ECS-assigned identifier that uniquely identifies a party on a call. The ECS
provides the identifier and the adjunct should retain it for future operations. The
party identifier is unique within the call_id.