Filter
Top Products
Event Reporting and U-Abort Capabilities
3-28 Issue 7 May 1998
— The call was redirected using the ASAI Redirect Call capability.
However, if the Redirect Call request was sent over a domain
control association, then that domain association receives an ACK,
but does not receive the Call Redirected Event Report.
■ When the domain-controlled station is an analog phone and an alerting call
is now alerting elsewhere (gone to coverage or redirected by ASAI
Redirect Call), either:
— The pick-up feature is used to answer a call alerting an analog
principal’s station, or
— An analog phone call is sent to coverage due to “no answer” (the
analog set’s call is redirected).
This event report
will not
be sent if the Domain (Station) Control is never
alerted or if it retains a simulated bridged appearance until the call is
dropped/disconnected. Examples of situations when this event is not sent
are:
■ Bridging
■ Call forwarding
■ Calls to a TEG (multifunction set with TEG button)
■ Cover-All
■ Coverage/Busy
■ Incoming PCOL calls (multifunction sets)
■ Pick-up for multifunction set principals
This event report never follows a Connected Event Report and is always
preceded by an Alerting Event Report.
Call Redirected Report Items
The following is a list of the items provided with this report:
call_id
This ECS-assigned call identifier is used to associate event reports to calls and
identify a call the adjunct wants to control. The call identifier is unique within ECS.