Filter
Top Products
ASAI and Call Control
4-10 Issue 7 May 1998
service_circuit [optional] This parameter must be set to
“classifier” if the destination is off-ECS and the
trunk access code is contained in the
dest_route_select regardless of whether the
option “Call Classification after Answer
Supervision” is set or not.
This parameter is optional if the destination is
on-ECS or the trunk access code is included in
the dest_addr parameter. If the trunk access code
is part of the destination address and no service
circuit parameter is included, then answer may not
be detected over non-ISDN trunks. This may lead
to the call being hung for up to ten minutes if the
call is not answered.
return_ack [optional] If this parameter is present, it indicates
that the ECS should return an acknowledgement
to the request. If this parameter is not present,
then the ECS does not return an
acknowledgement.