Filter
Top Products
ASAI and Feature Interactions
Issue 7 May 1998
12-53
Data Delivery/Data Restriction
If a call is established with Data Privacy, a request to add a party using
Single-Step Conference will be denied. If a station in a call is administered with
Data Restriction, a request to add a party to the call using Single-Step Conference
will be denied.
Station Hunting
Applications using call control can follow a call around when this feature is active.
Applications monitoring stations will see appropriate event reports as the call
follows the hunting path.
Switch-Classified Calls
Specifying a station or group AWOH (Administered Without Hardware), as
originator is not supported.
System Restarts
■ Reboot, COLD1, COLD2 System Restarts
- cause the BRI port board to be reset thereby disconnecting the BRI
signaling channels. All ASAI associations are terminated.
■ System Warm Start Hot Start
- cause a layer 2 drop which can lead to the adjunct clearing associations
or restarting layer 3.
Temporary Bridged Appearances
The operation of this feature has not changed with ASAI. No event is provided
when a temporary bridged appearance is created at a multifunction set. If the user
is connected to the call (becomes active on such an appearance), the Connected
Event Report is provided. If a user goes on-hook after having been connected on
such an appearance, a Disconnect/Drop Event Report with cause CS0/16 (normal
clearing) is generated for the disconnected extension (bridged appearance).
If the call is dropped from the temporary bridged appearance by someone else, a
Disconnect/Drop Event Report is also provided.
Temporary bridged appearances are not supported with analog sets. Analog sets
get the Call Redirected Event Report when such an appearance would normally
be created for a multifunction set.