Filter
Top Products
Event Reporting and U-Abort Capabilities
Issue 7 May 1998
3-27
Call Redirected Event Report
The Call Redirected Event Report is sent to notify the adjunct that event reporting
for a call will no longer be provided. This event report is sent under the
circumstances detailed below.
For Monitored Calls
This event is sent when a monitored call enters a new domain (split or VDN) that
has Event Notification active. For example, if a call leaves one monitored domain
and enters another, a Call Redirected Event Report is sent to the association that
the call left. The Call Offered to Domain Event Report must have been received
prior to the Call Redirected Event Report.
Starting with G3V3,
when an Active-Notification Call enters another
Active-Notification Domain (split or VDN) for the Multiple Monitors feature, ECS
sends a Call Redirected Event Report over the notification association(s) that
were active for the call. ECS also sends further Event Reports over the new
notification association(s).
When a call goes out on a trunk, it is not considered monitored by the Notification
Association on all the trunk groups. If the call was monitored before, it continues
to be monitored by the same domain (split or VDN).
For Controlled Calls
This event report is sent over a Domain (Station) Control association when a call
leaves the station, without the call having been dropped/disconnected. The
Alerting Event Report must have been received prior to the call Redirected Event
Report.
■ The following are possible reasons why a call (that had been alerting at the
station) may leave the station:
— One member of a coverage and/or answer group answers a call
offered to a coverage group. In this case, all other members of the
coverage and/or answer group that were alerting for the call receive
a Call Redirected Event Report.
— A call has gone to AUDIX coverage and the Coverage Response
Interval (CRI) has elapsed (the principal call is redirected).
— Principal answers the call while the coverage point is alerting and
the coverage point is dropped from the call.
— Stations are members of a TEG group with no associated TEG
button (typically analog stations).