Filter
Top Products
Installation and Test for CallVisor ASAI
14-8 Issue 7 May 1998
In the CDR System Parameters form, the CDR Call Splitting field must be
enabled if charging number is desired in the Charging Event Report
change to reflect transfers and conferences. Lastly, the CDR adjuncts must
be administered, or CDR Call Splitting will not take affect and will therefore
not affect the ASAI charging events.
■ Answering Machine Detection — System-Parameters Customer-Options
Features Form
■ Reason Codes — System-Parameters Customer-Options and System
Parameters Features Forms
■ Option for Switch-Classified Calls — System-Parameters
Customer-Options Form
■ Flexible Billing — System-Parameters Customer-Options Form. In
addition, the following optional system features must be activated to
support the MultiQuest Flexible Billing feature:
— ASAI for
Release 5: ASAI not needed when have tandeming.
— ISDN Primary Rate Interface (ISDN-PRI)
— MultiQuest Flexible Billing: For a tandem ECS, the Flexible Billing
option need not be active to tandem the NSF IEs to the next ECS.
For a ECS providing VRU access without an AP, the Flexible Billing
option need not be active to pass the NSF IEs to the VRU. The VRU
must be equipped with a PRI interface and treated as if it were a
trunk group to a tandem ECS.
Finally, the following optional system features will probably be used when
Flexible Billing is active:
— Automatic Call Distribution (ACD) — Required if call routing uses
ACD I
— Call Vectoring — Required if inbound calls use Call Vectoring for
routing
■ Selective Listening — System Parameters Customer-Options Form
■ Call Classification After Answer Supervision — System Parameters
Features Form
For detailed instructions regarding the administration of the above features, see
the
DEFINITY Enterprise Communications Server Implementation
document,
555-230-302.
CallVisor ASAI Link Testing
After the CallVisor ASAI link is administered and installed, perform the following
tests as described in the
DEFINITY Enterprise Communications Server
Installation and Test for Single-Carrier Cabinets
, 555-230-894,
or DEFINITY
Enterprise Communications Server Installation and Test for Multi-Carrier
Cabinets
, 555-230-112.