Filter
Top Products
Issue 7 May 1998 14-1
14
Installation and Test for
CallVisor ASAI
Hardware Installation
The CallVisor ASAI link requires the following hardware components:
1. ISDN-BRI Circuit Pack (for CallVisor ASAI-BRI link) or ASAI-DEFINITY
LAN Gateway system assembly (for CallVisor ASAI-Ethernet link).
(Multiple links may use both.)
2. Packet Controller Circuit Card (for internal communications)
3. Packet Maintenance Circuit Pack
Check that your DEFINITY ECS has the above components. If installation of any
of the above components is required, refer to either the
DEFINITY Enterprise
Communications Server Installation and Test for Single-Carrier Cabinets
,
555-230-894,
or DEFINITY Enterprise Communications Server Installation and
Test for Multi-Carrier Cabinets
, 555-230-112.
The following hardware may be needed for your specific CallVisor ASAI
application. See
DEFINITY Enterprise Communications Server Installation and
Test for Single-Carrier Cabinets
, 555-230-894, or
DEFINITY Enterprise
Communications Server Installation and Test for Multi-Carrier Cabinets
,
555-230-112, for complete information on how to install and test the hardware.
■ Announcement Circuit Pack — For integrated announcements
■ Call Classifier Circuit Pack — For predictive dialing call classification or for
call prompting applications
■ S1 Interface Circuit Pack (ISDN) — For CPN/BN delivery
■ Facility Test Circuit Pack — Required for duplicated systems only; optional
for unduplicated