Filter
Top Products
328
Communication operation and setting
4.24 Communication operation and setting
4.24.1 Wiring and configuration of PU connector
Using the PU connector, you can perform communication operation from a personal computer etc.
When the PU connector is connected with a personal, FA or other computer by a communication cable, a user program
can run and monitor the inverter or read and write to parameters.
(1) PU connector pin-outs
Purpose Parameter that must be Set
Refer to
Page
Communication operation from PU connector
Initial setting of computer link
communication (PU connector)
Pr. 117 to Pr. 124
333
Communication operation from RS-485
terminals
Initial setting of computer link
communication (RS-485 terminals)
Pr. 331 to Pr. 337,
Pr. 341
Modbus-RTU communication
specifications
Pr. 331, Pr. 332,
Pr. 334, Pr. 343,
Pr. 549
347
Restrictions on parameter write through
communication
Communication EEPROM write
selection
Pr. 342 334
Communication using USB (FR Configurator) USB communication Pr. 547, Pr. 548 360
Pin Number Name Description
1) SG
Earth (Ground)
(connected to terminal 5)
2) ⎯ Operation panel power supply
3) RDA Inverter receive+
4) SDB Inverter send-
5) SDA Inverter send+
6) RDB Inverter receive-
7) SG
Earth (Ground)
(connected to terminal 5)
8) ⎯ Operation panel power supply
CAUTION
⋅ Pins No. 2 and 8 provide power to the operation panel or parameter unit. Do not use these pins for RS-485 communication.
⋅ Do not connect the PU connector to the computer's LAN board, FAX modem socket or telephone modular connector. The
product could be damaged due to differences in electrical specifications.
8)
to
1)
Inverter
(Receptacle side
)
Front view