Filter
Top Products
Schematic Capture - Basics
4-20 Electronics Workbench
Note When wiring a component with multiple sections, an “X” indicates that a common pin
has been connected in another section of the component. In the example below, U5A
and U5B are sections of a Dual, Current Controlled Operational Transconductance
Amplifier. These two sections share a common pin on the IC (pin 11, VB+).
To delete a wire, click on it and press D
ELETE on your keyboard or right-click on it and choose
Delete from the pop-up menu that appears.
4.5.1.1 Autowire of Touching Pins
You have the option to make an automatic connection if a component pin is touching a wire,
another pin or a junction.
To enable/disable this option, select or deselect the Autowire when pins are touching checkbox
in the
General tab of the Preferences dialog box.
Pin 11 of U5B
(section B of U5) is
marked with an “X”.
This indicates that
pin 11 is connected
in another section of
U5.
Pin 11 is connected
to Q1 from
component U5A
(section A of U5).