Filter
Top Products
Design Toolbox
Multicap 9 User Guide 3-33
•
Pin Name — this layer contains the pin names, for example, “1Q” in a J-K flip-flop.
•
Pin Number — this layer contains the pin numbers.
•
Bus Entry Label — this layer contains the labels that appear at the point where a wire
enters a bus, for example, “Ln 1”.
The
Fixed Annotations layers consist of:
•
ERC Error Mark — this layer contains the marks that are placed on the schematic that
indicate ERC error points. See “5.4 Electrical Rules Checking” on page 5-32 for details.
•
Comment — this layer contains any comments that you “pin” to the workspace. Refer to
“4.9.5 Adding a Comment” on page 4-40 for details.
•
Text/Graphics — this layer contains any graphic elements that you place on the
workspace.
Custom Annotations layers can be added from the Sheet Properties dialog box. For details, see
“3.4.2.6 Sheet Properties - Visibility Tab” on page 3-31.
To hide a layer, disable the layer’s checkbox.
To show a hidden layer, enable the layer’s checkbox.
3.5.2 Hierarchy Tab
The Hierarchy tab contains a tree that shows the files in the design that you have open.
Design Root
Active Variant - see “6.5 Variants” on page 6-34
Included in Active Variant
Page 1 of multi-sheet design - see “6.1 Flat Multi-sheet
Design” on page 6-2
Page 2 of multi-sheet design
Subcircuit - see “6.2 Hierarchical Design” on page 6-3
Hierarchical Block - see “6.2 Hierarchical Design” on page 6-3