Filter
Top Products
Editing a Component’s Footprint
Multicap 9 User Guide 8-47
Mapping Pins
The following example uses the Advanced Pin Mapping dialog box with the footprint pins
displayed in the right pane. If you wish to display the symbol pins in the right pane, click
Switch. The same mapping techniques will apply.
To map footprint to symbol pins:
1. Display the
Advanced Pin Mapping dialog as described earlier in this section.
Tip Hover the cursor over a pin in the right pane to display a tooltip that shows the pin’s
mapping.
2. Select a symbol pin in the left column and click on a blue (unmapped) footprint pin in the
right pane. The footprint pin’s color turns black to indicate that it is mapped.
3. You can also click-and-drag a symbol pin to footprint pin in the right pane to create a
mapping (or vice versa).
Grey indicates that
this pin is selected.
Red indicates
mapping error
(duplication).
Black
indicates pin
is mapped.
Blue indicates
unmapped
pin.