Filter
Top Products
Title Block Editor
Multicap 9 User Guide 5-17
3. Click
OK, move the cursor to the desired location and click the mouse to place the field.
4. After completing any other edits to the title block, select
File/Exit and save the changes
when prompted. You are returned to the main Multicap screen, where the field code
(#REV) has been replaced by text. This text is set in the
Revision field of the Title Block
dialog box, which is found in the main Multicap application. For details, see “4.9.3.1
Entering the Title Block Contents” on page 4-37.
Caution The width of a field as displayed in the Title Block Editor is
not the same as the actual text that is placed in that field
using the
Title Block dialog box (see “4.9.3.1 Entering the
Title Block Contents” on page 4-37). Space used is also
dependant on the font size. If after placing the actual text in
the title block using the
Title Block dialog box, you find that
text overlaps, you must either adjust the text, or return to the
Title Block Editor and adjust the positioning of the fields.
Note If text in the
Title Block dialog box does not appear in your title block, it is because the
field corresponding to that text was not placed in the title block using the
Title Block
Editor
.
Code for placed
Revision field.
All placed fields
appear in green
highlighting.
Placed text is not
highlighted.
Field code has been
replaced by text.