Filter
Top Products
Installing Multicap
1-4 Electronics Workbench
2. Copy the entire \database folder to a location that you will remember later (for example,
C:\Temp).
3. Your database is now safely backed-up.
Note You will require Administrator privileges to install Electronics Workbench software
and to enter release codes.
1.3.2 Single User Edition
You have been provided with a serial number that you will be required to enter at the time of
installation. The Single User Edition is only licensed on the computer on which you install it.
If for any reason you wish to move the software to a different computer, you must first
uninstall it from the initial computer, and then re-install it onto the new computer. In this case,
you must contact Electronics Workbench to receive a new Release Code.
1.3.2.1 Installing the Single User Edition
The Multicap 9 CD you received will autostart when inserted in the CD-ROM drive. Follow
the instructions below and on the screen during the installation process.
To install Multicap 9:
1. Copy down the serial number you have received with your Multicap 9 package.
2. Exit all Windows applications prior to continuing with the installation.
3. Insert the Multicap 9 CD into your CD-ROM drive. When the splash screen appears, click
on Multicap 9 to begin the installation.
4. Follow the on-screen prompts to complete the installation.
1.3.2.2 Requesting a Release Code for the Single User
Version
Multicap 9 requires you to enter a Release Code within five days of the date of installation.
After the five day grace period has expired, Multicap 9 will not run until a Release Code is
entered.
To obtain your Release Code, you must provide us with the Serial Number and Signature, as
shown on the splash screen that displays when you launch Multicap. Contact Electronics
Workbench via our website (preferred method) at www.electronicsworkbench.com
and select
the Product Registration link, or call Customer Service at 1.800.263.5552. Customers outside
North America should contact their local distributor.