Filter
Top Products
Labeling
Multicap 9 User Guide 4-37
3. You can also move the placed title block by right-clicking on it and selecting one of:
•
Move to/Bottom Left — places the title block in the bottom-left corner of the
workspace
•
Move to/Bottom Right — place the title block in the bottom-right corner of the
workspace
•
Move to/Top Left — places the title block in the top-left corner of the workspace
•
Move to/Top Right — places the title block in the top-right corner of the workspace.
To add a title block with a new format, refer to “5.3 Title Block Editor” on page 5-13 and then
place the new title block on the circuit following the procedure above.
4.9.3.1 Entering the Title Block Contents
To edit the contents of the title block:
1. Right-click on the title block and select
Properties from the pop-up that appears.
Or
Double-click on the title block.
The
Title Block dialog box appears.
2. The information that displays is in the following table. Make edits as desired and click
OK.
Note If a field in the
Title Block dialog box contains information, and that information does
not appear in your title block, it is because the field that contains that information was
not placed in the title block. If this occurs, right-click on the title block, select
Title Block Editor, and place the required field in the title block. For details, see “5.3.2
Placing Fields” on page 5-16.