Filter
Top Products
Working with Larger Designs
6-20 Electronics Workbench
5. Select
Place/Connectors/Bus HB/SC Connector and place the connector in the HB/SC on
the end of the bus. The symbol for the HB/SC in the main circuit will change to reflect the
addition of the
Bus HB/SC Connector. (See below).
6. In the main circuit, attach the bus to the BusIO pin on the HB/SC by hovering the cursor
over one end of the bus and clicking when the cursor changes to a crosshair. Move the
cursor to the BusIO pin on the HB/SC symbol and click to place. The
Bus HB/SC Mapping
Properties
dialog box appears.
7. In the
Bus Pin box, select the buslines from the Bus IO pin you wish to map and click on
the activated down-arrow button.