Filter
Top Products
Placed Component Properties
Multicap 9 User Guide 5-3
2. Click the
Display tab.
3. Disable
Use Schematic Global Setting.
4. Enable the identifying information you want displayed for this component, and disable the
identifying information you do not want displayed for this component.
5. To cancel your settings, click
Cancel. To save your settings, click OK.
5.1.2 Viewing a Placed Component’s Value
The Value tab of the “properties” dialog box for a component shows the value being used for
the placed component. Depending on whether the component is a “real” component or a
virtual component, you see one of two types of tabs when you double-click on a placed
component.
5.1.2.1 Real Components
In one sense of the word, all components found in Multicap are virtual. They are virtual
representations of components like resistors, capacitors and transistors. Wired together and
When this option is
enabled, the types
of identifying
information
displayed for this
individual
component are
controlled by the
circuit’s settings.
When the above
global setting option
is not enabled, these
options are available
and determine which
identifying
information is
displayed for this
individual component.