Filter
Top Products
Circuit Description Box
Multicap 9 User Guide 4-49
margin.
4. In the
Alignment drop-down list, select whether the paragraph is left-, right-, or
center-aligned.
5. Click
OK to close the dialog box.
4.10.1.3 Tabs Dialog Box
Use the Tabs dialog box to enter tab settings for the Circuit Description Box.
To enter tab settings for the
Circuit Description Box:
1. Open the
Edit Description window as described in “4.10 Circuit Description Box” on
page 4-47.
2. Select
Format/Tab to display the Tabs dialog box.
3. Enter the desired position for the tab (for example 1.25”) in the
Tab Stop Position field and
click
Set.
Note You can also click in the top ruler bar to place a tab.
To remove a tab setting:
1. Highlight the desired setting and click
Clear.
2. To clear all tabs, click
Clear All.
4.10.1.4 Date and Time Dialog Box
Use the Date and Time dialog box to enter a formatted date and/or time in the Circuit
Description Box
.
To place a date and/or time in the
Circuit Description Box:
1. Open the
Edit Description window as described in “4.10 Circuit Description Box” on
page 4-47.
2. Click at the location where you wish to place the date and/or time.
Tab to be cleared
Click to remove
selected tab.