Filter
Top Products
Uninstalling a Site Version
Multicap 9 User Guide 1-17
1.8 Uninstalling a Site Version
1.8.1 Uninstalling Standalone Multi-Station Installation
At each standalone workstation, perform the following procedure:
1. Ensure you have recorded the serial number.
2. Click the Windows
Start button.
3. Click
Control Panel.
4. Click
Add or Remove Programs. The Add or Remove Programs dialog appears.
5. From the
list, select Multicap 9 and select Remove. Multicap 9 will be removed from the
standalone workstation.
1.8.2 Uninstalling Network Installation
Only the workstation that was used to install Multicap 9 to the network directory (host
computer) can be used to remove it. Performing the steps below on other workstations (client
computer) will only remove the Multicap 9 folder.
To uninstall Multicap 9 from the network directory or the Multicap 9 folder:
1. Ensure that you have recorded the serial number prior to uninstalling Multicap 9.
2. Click the Windows
Start button.
3. Click
Control Panel.
4. Click
Add or Remove Programs. The Add or Remove Programs dialog appears.
5. From the
list, select Multicap 9 and select Remove. If the workstation is the host computer,
Multicap 9 is removed from the network directory. If the workstation is only a client
computer, the Multicap 9 folder is removed.
1.8.3 Uninstalling Combination Standalone
Multi-Station and Network Installations
Follow the instructions in “1.8.1 Uninstalling Standalone Multi-Station Installation” on
page 1-17 and “1.8.2 Uninstalling Network Installation” on page 1-17, as necessary.