Filter
Top Products
Variants
Multicap 9 User Guide 6-41
7. Click
OK to close the component’s properties dialog box.
8. Set the variant status for the lamps X1 and X2, using the
Variant tab as described in the
preceding steps. X1 is rated at 120 V, so it is for the North American variant, and X2 is
rated at 220V, so it is for the European variant.
When you are done, the circuit will appear as shown below:
Component is not dimmed, indicating that it is present in the
active variant. To set which variant is active on your workspace,
see “6.5.2.3 Setting the Active Variant” on page 6-44.
Label indicates
component is only
in the NA variant.