Filter
Top Products
Multicap 9 User Guide 10-1
Chapter 10
Transfer/Communication
This chapter explains how to use Multicap to transfer circuit schematics (in whole or in part).
Some of the features described in this chapter may not be available in your edition of
Multicap 9. Such features have an icon in the column next to their description. Refer to the
release notes for a list of the features in your edition.
The following are described in this chapter.
10.1 Exporting to PCB layout
Multicap provides features that integrate with many PCB layout programs, and it is
particularly well-integrated with its sister product, Ultiboard.
In Multicap you define PCB Layers, and then constrain nets to be routed on these layers. You
can also indicate for specific nets the desired, min and max trace widths, min and max trace
lengths, minimum distances to other traces, pads, vias, and so on. As well, Multicap will keep
Subject Page No.
Exporting to PCB layout
Transferring from Multicap to Ultiboard for PCB Layout
Transferring to Other PCB Layout Packages
Multisection Components
10-1
10-3
10-3
10-4
Forward Annotation 10-4
Back Annotation 10-4
Importing Files with Other Formats 10-5
Internet Design Sharing 10-6