Filter
Top Products
Working with Larger Designs
6-18 Electronics Workbench
of a nested circuit may in general be connected to a different bus. If the bus in the parent
circuit is empty, no dialog will be presented and the bus will be wired in the natural manner.
To facilitate usage of buses, a powerful bus vector connect facility is provided that allows for
multiple pins of a chip to be connected to a bus in a single operation. This dialog allows you
to select pins from multi-pin components to connect to the buslines.
6.4.1 Placing a Bus
To place a bus in your circuit:
1. Select
Place/Bus.
2. Click on the first point for the bus.
3. Click on the next point for the bus.
4. Continue to click on points until the bus is complete. Buses can be placed horizontally,
vertically, and at 45 degrees.
5. Double-click to mark the ending point of the bus.
Bus HB/SC Connector