Filter
Top Products
Title Block Editor
Multicap 9 User Guide 5-31
Snap To Grid button. Snaps the selected element(s) to the Draw Grid that is
found within the title block’s boundary box.
Distribute Horizontal button. Evenly spaces the selected objects horizontally.
At least three objects must be selected to enable this button.
Distribute Vertical button. Evenly spaces the selected objects vertically. At
least three objects must be selected to enable this button.
Bring To Front button. Brings selected element(s) to the foreground on the
workspace. Other element(s) appear behind them.
Send To Back button. Sends selected element(s) to the background on the
workspace. Other elements appear in front of them.
Rotate 90 Counter CW button. Rotates the selected element(s) 90 degrees
counter-clockwise.
Rotate 90 Clockwise button. Rotates the selected element(s) 90 degrees
clockwise.
Flip Horizontal button. Flips the selected element(s) horizontally on the
workspace.
Flip Vertical button. Flips the selected element(s) vertically on the workspace.
Ungroup button. Returns an element that was made using the Group
command back to its individual elements.
Group button. Places selected elements in one group.
Resize Boundary Box button. Places a cursor at the lower-right side of the
boundary box. Drag it to the desired location to resize the boundary box. You
cannot make the boundary box smaller than the elements that it contains or
smaller than is required for the pins that are attached to it.
Button Description