Filter
Top Products
User Interface
3-16 Electronics Workbench
3.3.5 Pop-up From a Title Block
If you right-click on a selected title block in the circuit window, a pop-up menu of appropriate
commands appears. These commands are:
Pen Style Changes the style of the pen for a selected graphic. Is
disabled if text is selected.
Fill Color Changes the color of the fill for selected rectangles, ellipses
and polygons. Is disabled if any other graphic element, or
text is selected.
Fill Type Changes the appearance of the fill for selected rectangles,
ellipses and polygons. Is disabled if any other graphic
element, or text is selected.
Arrow Places an arrow on selected lines and multilines. Is disabled
if any other graphic element, or text is selected.
Order Use to Bring to Front or Send to Back selected element.
Assign to Layer Places selected element on the selected layer. Deselect to
remove an element from the assigned layer. See “3.4.2.6
Sheet Properties - Visibility Tab” on page 3-31.
Font Lets you select a font, font style and size for selected text.
Properties Is inactive for text blocks or graphics.
Command Description
Command Description
Delete Deletes the selected title block.
Edit Title Block Launches the Title Block Editor. For details, see “5.3 Title
Block Editor” on page 5-13. (To edit the selected title block,
select Edit Symbol/Title Block).
Color Displays a palette where you can change the selection’s
color.
Move to - Bottom Left Places the selected title block at the bottom left corner of the
document.
Move to - Bottom Right Places the selected title block at the bottom right corner of
the document.