Filter
Top Products
Installing Multicap
1-6 Electronics Workbench
have the client software installed locally, and other workstations may have the software
served from a shared file system.
3. On several file servers, each one of which serves the software to a subset of the networked
computers, and, optionally, also on selected workstation computers. This option is
intermediate between options 1 and 2.
If options 1 or 3 are selected, the network must be set up to allow access from the
workstations to the shared file systems on which the client software is installed. For all of the
options above (1, 2 or 3), you must also install the Electronics Workbench Network License
Server (NLS) on any one computer on the network. This computer does not need to share a
file system with the client software. However, it requires TCP/IP access from the workstation
computers. This computer will run a Windows service that keeps track of and limits the
number of licenses currently in use. From that computer, administrators may run the NLS
utility that shows information on licenses available, the users currently utilizing the licenses,
and enables users to be remotely logged off.
As with the single user edition, you have been provided with a serial number that you will
require during each installation of Multicap 9 and for the lone installation of NLS. The serial
number identifies the product as being a Network Edition. Using NLS, you may access the
hardware signature of the NLS server computer. You must send the NLS server's hardware
signature and your serial number to Electronics Workbench. You will receive a Release Code
that you will need to enter into NLS to enable the network edition to function. The Release
Code encodes the number of seats and any term limits on your license.
A Multicap workstation will access either a fixed or a floating license depending upon the
serial number entered at the time of install of the Multicap 9 client software that the
workstation uses. In either the fixed or the floating case, the Multicap 9 client software may
be installed either directly on the workstation computer, or onto a shared file server. Different
serial numbers are provided to you for each of these cases.
Note NLS is only licensed on the computer on which you install it. If for any reason you
wish to move the NLS service to a different computer, you must first uninstall it from
the initial computer, and then re-install it onto the new computer. In this case, you must
contact Electronics Workbench to receive a new Release Code.
1.3.4.1 Installing the Network Edition
The Multicap 9 CD you received will autostart when inserted in the CD-ROM drive. Follow
the instructions below and on the screen during the installation process.
To install Multicap 9:
1. Copy the serial number you have received with your Multicap 9 package.
2. Exit all Windows applications prior to continuing with the installation.