Filter
Top Products
Working with Larger Designs
6-26 Electronics Workbench
Note After wiring, you can re-name the net, by double-clicking on it and editing the name in
the
Net dialog box that appears.
Note You can select a bus entry to move it with the Arrow keys, or rotate it with S
HIFT-R.
Note You can double-click on a bus entry to edit its properties via the
Bus Entry Connection
dialog box.
In Net Bus Wiring Mode
1. Wire the bus into your circuit by drawing a wire to any location on the bus. The Bus Entry
Connection
dialog box appears:
2. Select the desired net and click
OK.
Note After wiring, you can re-name the net as usual, by double-clicking on it and editing the
name in the
Net dialog box that appears.
Note You can select a bus entry to move it with the Arrow keys, or rotate it with S
HIFT-R.
Note You can double-click on a bus entry to edit its properties via the
Bus Entry Connection
dialog box.
Use the default net.
Or
Select one of the existing nets.