Buses
Multicap 9 User Guide 6-33
7. In the
Bus box, select the bus you wish to connect to from the Name drop-down list.
8. In the
Nets in Bus field select:
• existing nets — for example, “1” and/or “2” in the above, and click the down-arrow
button to move them to the bottom-right field.
• <new> — to map new nets to the selected component pins. Each time you click the
down-arrow button when <new> is highlighted, an instance of <new> appears in the
bottom-right field.
Note You can also click
Auto-assign to automatically assign new nets to the mapped pins.