Filter
Top Products
Buses
Multicap 9 User Guide 6-19
6.4.1.1 Placing a bus across Multi-pages
To place the same bus across multi-pages:
1. Select
Place/Connectors/Bus-Offpage Connector to place a Bus-Offpage Connector on the
workspace.
2. Wire the connector to the desired bus.
3. Place a bus on the multi-page, and wire another
Bus-Offpage Connector to the bus.
4. Double-click on the bus and change its name to match the busname of the bus on the main
page.
6.4.1.2 Connecting Buses to HB/SCs
To connect a bus to a bus on a hierarchical block (HB) or a subcircuit (SC):
1. Place a bus on the workspace as described in “6.4.1 Placing a Bus” on page 6-18.
2. Attach wires to the bus as described in “6.4.4 Wiring to a Bus” on page 6-25.
3. Place a hierarchical block or subcircuit on your workspace.
4. Place a bus in the HB/SC and attach wires to it as desired.
Note This example uses a hierarchical block.
Hierarchical Block in main circuit
Contents of Hierarchical Block