Filter
Top Products
Importing Files with Other Formats
Multicap 9 User Guide 10-5
10.4 Importing Files with Other Formats
Files with the following formats can be opened with Multicap 9:
• Multisim 7 and Multicap 7 files — these have a .ms7 extension.
• Multisim 8 and Multicap 8 files — these have a .ms8 extension.
• Multisim 9 and Multicap 9 files — these have a .ms9 extension.
• Multisim files — these have a .msm extension.
• Electronics Workbench v5 files — these have a .ewb extension.
• Ulticap schematic files — these have a .utsch extension.
• OrCad schematic files — these have a .dsn extension.
• SPICE netlist files — these have a .cir extension.
Note When opening files from earlier versions of Electronics Workbench, Multisim or
Multicap, Reference Designators may be renamed to ensure that all instances are
unique.
To open a file of any of the above-listed types except Ulticap:
1. Select
File/Open. A standard Open dialog box displays.
2. Select the desired file type from the
Files of Type drop-down list.
3. Highlight the desired file and click
Open. The file is opened in Multicap.
To open a Ulticap schematic file:
1. Select
File/Open. A standard Open dialog box displays.
2. Select the desired file type from the
Files of Type drop-down list.
3. Highlight the desired file and click
Open. The following dialog displays: