Filter
Top Products
Multicap Tutorial
2-10 Electronics Workbench
To create a
BOM for your circuit:
1. Click the
Reports menu and choose Bill of Materials from the menu that appears.
2. The report appears, looking similar to this:
To print the
Bill of Materials, click the Print button. A standard Windows print screen appears,
allowing you to choose the printer, number of copies, and so on.
To save the
Bill of Materials to a file, click the Save button. A standard Windows file save
dialog box appears, allowing you to specify the path and file name.
Because the
Bill of Materials is primarily intended to assist in procurement and manufacturing,
it includes only “real” parts. That is, it excludes parts that are not real or able to be purchased,
such as sources or virtual components.
To see a list of components in your circuit that are not “real” components, click the
Virtual
button. A separate window appears, showing these components only.
Detailed information on this and other reports can be found in Chapter 9, “Reports”.