Filter
Top Products
Schematic Capture - Basics
4-36 Electronics Workbench
4.9.3 Adding a Title Block
A powerful title block editor allows you to create customized title blocks. If desired, a title
block can be included on every page of your design.
Various fields in the title block are automatically filled in depending upon the context and
various document properties. When designing the title block, you choose one of the
pre-defined fields or create your own. You choose appropriate fonts depending upon your
language of preference.
Title blocks can include elements such as text, lines, arcs, bezier curves, rectangles, ovals,
arcs, bitmaps, and so on.
To add a title block to your circuit:
1. Select the title block template and place the title block in the desired location.
2. Enter the information about your circuit that is to be displayed.
3. Optionally, use the title block editor to change the appearance of the selected title block or
create a new title block template.
Details follow.
To add a title block of an existing format to your circuit:
1. Choose
Place/Title Block. A standard “Open” dialog box appears. If necessary, navigate to
the
Titleblocks folder.
2. Select the desired title block template and click
Open. The selected title block appears
attached to your cursor. Drag and drop it in the desired location, typically the lower-right
corner of the page.
Sample title block