Filter
Top Products
Component Editing
8-28 Electronics Workbench
Pins Menu
The following selections are available under the Pins menu. For details on pin types, see “
Pins” on page 8-20.
Center
By
Mouse
When viewing the workspace at high magnifications, you can use this
command to center the image on the workspace. Select Center By Mouse and
then click on the spot that you would like to be placed at the center of the
workspace.
Redraw Redraws all elements in the workspace.
Menu Use
Menu Use
Select Use to select element(s) on the workspace by clicking and dragging the
mouse.
Line Pin Places a line pin on the workspace.
Dot Pin Places a dot pin on the workspace.
Clock
Pin
Places a clock pin on the workspace.
Dot-
Clock
Pin
Places a dot-clock pin on the workspace.
Input
Wedge
Pin
Places an input wedge pin on the workspace.
Output
Wedge
Pin
Places an output wedge pin on the workspace.
Zero-
Length
Pin
Places a zero-length pin on the workspace.
Place
Pin Array
Displays the Pin Array Options dialog box where you enter parameters to
place a pin array on the workspace. For details, see “ Pin Array Options Dialog
Box” on page 8-23.
Default
Pin
Options
Displays the Default Pin Options dialog box where you enter the default
settings for the various pin types. For details, see “ Default Pin Options Dialog
Box” on page 8-22.