Filter
Top Products
Multicap Tutorial
2-4 Electronics Workbench
You can import legacy OrCAD® or PSpice® files by selecting the desired type that appears in
the "Files of Type" drop-down list of the Windows Open dialog.
To view files from earlier versions of Multicap, select the desired version in the
Files of Type
drop-down in the
Open dialog.
Placing the Components
1. Open sample_and_count.ms9 as described above.
2. Select
Place/Component to display the Select a Component browser, navigate to the
7-segment LED display as shown below and click
OK. The component appears as a
"ghost" on the cursor.
Once you have selected the desired
Group and Family, start typing the component's name.
As you type, the string appears in the
Searching field at the bottom of the browser. In the
above example, type SEVEN_SEG_DECIMAL_COM_A_BLUE. Matches are displayed
as you type.
3. Move the cursor to the top-right of the workspace and left-click to place the component.
Note that the Reference Designator for this component is "U1".