Filter
Top Products
Multicap Menus
Multicap 9 User Guide A-13
A.1.4.8 Place/Replace by Hierarchical Block
Replaces the elements that you have selected with a hierarchical block. See “6.2.5.2
Replacing Components with an HB” on page 6-9.
A.1.4.9 Place/New Subcircuit
Places a subcircuit without any components. For details, see “6.2.6 Adding a Subcircuit” on
page 6-9.
A.1.4.10Place/Replace by Subcircuit
Replaces the selected components with a subcircuit containing those components. For details,
see “6.2.6 Adding a Subcircuit” on page 6-9.
A.1.4.11 Place/Multi-Page
Opens a new flat page. For details, see “6.1 Flat Multi-sheet Design” on page 6-2.
A.1.4.12Place/Merge Bus
Merges two buses together. For details, see “6.4.3 Merging Buses” on page 6-24.
A.1.4.13Place/Bus Vector Connect
This is the preferred method for placing numerous connections from a multi-pinned device,
such as an IC, to a bus. For details, see “6.4.5 Bus Vector Connect” on page 6-27.
A.1.4.14Place/Comment
Use to “pin” a comment to the workspace, or directly to a component. When a component
with an attached comment is moved, the comment also moves. For details, see “4.9.5 Adding
a Comment” on page 4-40.
A.1.4.15Place/Text
Lets you place text on the circuit. For details, see “4.9.4 Adding Miscellaneous Text” on
page 4-39.
A.1.4.16Place/Graphics
Lets you place any of the graphic elements mentioned below.