Garmin Flight Deck 100 Marine Instruments User Manual


  Open as PDF
of 688
 
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
147
AUDIO PANEL AND CNS
ADF TUNING
ADFfrequenciesinthe190.0-kHzto1799.5-kHzrangeareenteredinthestandbyADFfrequencyeldof
theADF/DMETuningWindow.ThesystemdoesnottunetheADFemergencyfrequency,2182.0-kHz.
Tuning an ADF frequency:
1) Select the ADF/DME Softkey to display the ADF/DME Tuning Window.
2) Turn the large
FMS
Knob to place the selection cursor over the standby ADF frequency field.
3) Turn the small
FMS
Knob to begin data entry and change each digit.
4) Turn the large
FMS
Knob to move the cursor to the next digit position.
5) Press the
ENT
Key to complete data entry for the standby frequency.
Figure 4-30 Entering ADF Standby Frequencies
Press the
ENT
Key to
Complete ADF
Frequency Entry
Turn the Small
FMS
Knob to
Enter Data in
the Standby ADF
Frequency Field
Turn the Large
FMS
Knob
to Move the
Cursor to the
Next Character
Pressing the
CLR
Key before completing frequency entry cancels the frequency change and reverts back to
the previously entered frequency.
Pressing the
CLR
Keywhenthecursorisashing,clearsthefrequencyandreplacesthestandbyeldwith
‘0000.0’.
Transferring the active and standby ADF frequencies:
1) Turn the large
FMS
Knob to place the selection cursor over the standby ADF frequency field.
2) Press the
ENT
Key to complete the frequency transfer.
Figure 4-31 Transferring ADF Frequencies
Press the
ENT
Key to Transfer
the ADF
Frequencies
 previous next