Filter
Top Products
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
18
SYSTEM OVERVIEW
Level 1 Level 2 Level 3 Level 4
Description
XPDR
Displays transponder mode selection softkeys
XPDR1
Selects the #1 transponder as active
XPDR2
Selects the #2 transponder as active
STBY
Selects standby mode (transponder does not reply to
any interrogations)
ON
Selects Mode A (transponder replies to identification
interrogations)
ALT
Selects Mode C – altitude reporting mode (transponder
replies to identification and altitude interrogations)
GND
Manually selects Ground Mode, the transponder does
not allow Mode A and Mode C replies, but it does
permit acquisition squitter and replies to discretely
addressed Mode S interrogations (not available with
TCAS II)
VFR
Automatically enters the VFR code (1200 in the U.S.A.
only)(not avialable with TCAS II)
CODE
Displays transponder code selection softkeys 0-7
0 — 7
Use numbers to enter code
BKSP
Removes numbers entered, one at a time
IDENT
Activates the Special Position Identification (SPI) pulse
for 18 seconds, identifying the transponder return on
the ATC screen
TMR/REF
Displays Timer/References Window
NRST
Displays Nearest Airports Window
MSG
Displays Messages Window
Transponder/Traffic Softkeys with TCAS II Option
XPDR/TFC
Displays the transponder and TCAS II system selection
softkeys
MODE
Displays transponder mode selection softkeys
STBY
Selects transponder Standby Mode (transponder
does not reply to any interrogations). When the
transponder is set to standby, the TCAS II system is
also set to standby.
ON
Activates transponder (transponder replies to
identification interrogations). When the transponder is
set to ON, the TCAS II system is set to standby.
ALT
Altitude Reporting Mode (transponder replies to
identification and altitude interrogations). When the
transponder is set to ALT, the TCAS II system is set to
standby.