Filter
Top Products
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
617
APPENDIX A
REVERSIONARY SENSOR ANNUNCIATIONS
Reversionary sensor selection is annunciated in the Reversionary Sensor Window, as shown in Figure A-2.
These annunciations reflect reversionary sensors selected on one or both PFDs. Pressing the
SENSOR
Softkey
gives access to
ADC1
,
ADC2, ADCSTBY
,
AHRS1
,
AHRS2
, and
ATTSTBY
Softkeys. These softkeys allow manual
switching of sensors. In the case of certain types of sensor failures, the system may make some sensor selections
automatically. The GPS sensor cannot be switched manually.
Figure A-2 Reversionary Sensor Windows
Reversionary
Sensor
Window
Reversionary Sensor
Window Text
Condition
BOTH ON ADC1 Both PFDs are displaying data from the #1 Air Data Computer.
BOTH ON ADC2 Both PFDs are displaying data from the #2 Air Data Computer.
BOTH ON ADCSTBY Both PFDs are displaying data from the standby air data input.
BOTH ON AHRS1 Both PFDs are displaying data from the #1 AHRS.
BOTH ON AHRS2 Both PFDs are displaying data from the #2 AHRS.
BOTH ON ATTSTBY Both PFDs are displaying data from the standby attitude and heading reference input.
BOTH ON GPS1 Both PFDs are displaying data from the #1 GPS receiver.
BOTH ON GPS2 Both PFDs are displaying data from the #2 GPS receiver.
USING ADC1 PFD2 is displaying data from the #1 Air Data Computer.
USING ADC2 PFD1 is displaying data from the #2 Air Data Computer.
USING ADCSTBY PFD1 or PFD2 is displaying data from the standby air data input.
USING AHRS1 PFD2 is displaying data from the #1 AHRS.
USING AHRS2 PFD1 is displaying data from the #2 AHRS.
USING ATTSTBY PFD1 or PFD2 is displaying data from the standby attitude and heading reference input.
USING GPS1 PFD2 is displaying data from the #1 GPS.
USING GPS2 PFD1 is displaying data from the #2 GPS.