Garmin Flight Deck 100 Marine Instruments User Manual


 
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
190-00728-04 Rev. A
440
HAZARD AVOIDANCE
Displaying traffic on the Traffic Map Page:
1) Turn the large
FMS
Knob to select the Map Page Group.
2) Turn the small
FMS
Knob
to select the Traffic Map Page.
3) Select the TA ONLY or TA/RA Softkey to begin displaying traffic. TA ONLY or TA/RA is displayed in the Traffic
mode field.
4) Select the REL or ABS Softkey to display the relative or absolute altitude of other aircraft.
5) Select the TFC STBY Softkey to place the system in the Standby Mode. ‘STANDBY’ is displayed in the Traffic
mode field.
6) Turn the RANGE Knob clockwise to display a larger area or counter-clockwise to display a smaller area.
altitUDe DisPlay
ThePilotcanselectthevolumeofairspaceinwhichnon-threatandproximitytrafcisdisplayed.Trafc
Advisories(TAs)andResolutionAdvisories(RAs)outsideoftheselimitswillalwaysbeshown.
Changing the altitude range:
On the PFD:
1) Press the XPDR/TFC Softkey.
2) Press the TCAS Softkey
3) Press the ALT RNG Softkey
4) Press one of the following altitude range Softkeys:
ABOVE: Displays non-threat and proximity traffic from 9900 feet above the aircraft to 2700 feet below the
aircraft. Typically used during climb phase of flight.
NORMAL: Displays non-threat and proximity traffic from 2700 feet above the aircraft to 2700 feet below
the aircraft. Typically used during enroute phase of flight.
BELOW: Displays non-threat and proximity traffic from 2700 feet above the aircraft to 9900 feet below the
aircraft. Typically used during descent phase of flight.
UNREST (unrestricted): All traffic is displayed
5) Press the BACK Softkey.
On the MFD:
1) On the Traffic Map Page, select the
ALT RNG
Softkey.
2) Select one of the following Softkeys (see softkey description in step 4 above):
ABOVE
NORMAL
BELOW
UNRESTRICTED
3) To return to the Traffic Page, select the BACK Softkey.