Garmin Flight Deck 100 Marine Instruments User Manual


  Open as PDF
of 688
 
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
621
APPENDIX A
MFD & PFD MESSAGE ADVISORIES
Message Comments
DATA LOST
– Pilot stored data was
lost. Recheck settings.
The pilot profile data was lost. System reverts to default pilot profile and settings. The
pilot may reconfigure the MFD & PFDs with preferred settings, if desired.
XTALK ERROR
– A flight display
crosstalk error has occurred.
The MFD and PFDs are not communicating with each other. The system should be
serviced.
PFD1 SERVICE
– PFD1 needs
service. Return unit for repair.
The PFD and/or MFD self-test has detected a problem. The system should be serviced.
PFD2 SERVICE
– PFD2 needs
service. Return unit for repair.
MFD1 SERVICE
– MFD1 needs
service. Return unit for repair.
MANIFEST
– PFD1 software
mismatch, communication halted.
The PFD and/or MFD has incorrect software installed. The system should be serviced.
MANIFEST
– PFD2 software
mismatch, communication halted.
MANIFEST
– MFD1 software
mismatch, communication halted.
PFD1 CONFIG
– PFD1 config error.
Config service req’d.
The PFD configuration settings do not match backup configuration memory. The system
should be serviced.
PFD2 CONFIG
– PFD2 config error.
Config service req’d.
MFD1 CONFIG
– MFD1 config
error. Config service req’d.
The MFD configuration settings do not match backup configuration memory. The system
should be serviced.
SW MISMATCH
– GDU software
version mismatch. Xtalk is off.
The MFD and PFDs have different software versions installed. The system should be
serviced.
PFD1 COOLING
– PFD1 has poor
cooling. Reducing power usage.
The PFD and/or MFD is overheating and is reducing power consumption by dimming the
display. If problem persists, the system should be serviced.
PFD2 COOLING
– PFD2 has poor
cooling. Reducing power usage.
MFD1 COOLING
– MFD1 has poor
cooling. Reducing power usage.
PFD1 KEYSTK
– PFD1 [key name]
Key is stuck.
A key is stuck on the PFD and/or MFD bezel. Attempt to free the stuck key by pressing it
several times. The system should be serviced if the problem persists.
PFD2 KEYSTK
– PFD2 [key name]
Key is stuck.
MFD1 KEYSTK
– MFD [key name]
Key is stuck.
CNFG MODULE
– PFD1
configuration module is inoperative.
The PFD1 configuration module backup memory has failed. The system should be
serviced.
PFD1 VOLTAGE
– PFD1 has low
voltage. Reducing power usage
The PFD1 voltage is low. The system should be serviced.
 previous next