Garmin Flight Deck 100 Marine Instruments User Manual


 
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
563
ADDITIONAL FEATURES
INCOMING CALLS
WhenviewingMFDpagesotherthantheAUX-TELEPHONEPage,apop-upalertsimilartoFigure8-79
willbedisplayedandanauralalert“IncomingCall”willbeheard.Ifthecallisfromthecabin,CABINwillbe
displayedasseeninFigure8-79.IftheincomingcallisanIridiumnetworkcall,IRIDIUMwillbedisplayed.
Thepop-upalertmaybeinhibitedattimes,suchasduringtakeoff.Inadditiontothepop-upalert,aringing
phonesymbolwillbedisplayedtotherightoftheMFDpagetitleasshowninFigure8-79.Also,thevoice
alert“IncomingCall”willbeheardontheselectedcockpitaudio.
Figure 8-79 Incoming Call
Incoming Call Pop-up Incoming Call Symbol on MFD Page
Answering an incoming call in the cockpit:
1) Press the TEL Key on the appropriate audio panel.
2) Select the ANSWER Softkey on the MFD.
Or:
While viewing the AUX-TELEPHONE Page:
NOTE
: The Push-to-Talk switch is not utilized for telephone communication. The microphone is active after
selecting the ANSWER Softkey, and stays active until the call is terminated.
1) Press the TEL Key on the appropriate audio panel.
2) Press the MENU Key to display the Page Menu.
3) Turn either FMS Knob to place the cursor on ‘Answer Incoming Call’.
4) Press the ENT Key.
Selecting the IGNORESoftkeywillextinguishthepop-upwindowandleavethecurrentcallunanswered.
Selecting the IGNRE ALLSoftkeywillextinguishthepop-upwindowforthecurrentandallfutureincoming
callsandleavethecurrentcallunanswered.SelectingtheTELSoftkeywilldisplaytheAUX-TELEPHONE
Pageallowingadditionalcallinformationtobeviewedbeforeanswering.
Disabling incoming call alerts:
1) With the AUX-TELEPHONE Page displayed, press the MENU Key on the MFD to display the Page Menu.
2) Turn either FMS Knob to place the cursor on ‘Disable Incoming Call Alerts’.
3) Press the ENT Key. The voice and pop-up alert will not be displayed now when an incoming call is received.