Garmin Flight Deck 100 Marine Instruments User Manual


 
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
190-00728-04 Rev. A286
FLIGHT MANAGEMENT
WEIGHT PLANNING
NOTE: All weight planning page data fields displays data rounded to the nearest 10 pounds or 5
kilograms.
Figure 5-102 Weight Planning Page
A/C Payload Calculator
Basic Empty Weight Entry -
Pilot and Stores Weight Entry -
Basic Operating Weight
Calculation -
Passenger(s) Weight Entry -
Cargo Weight Entry -
Zero Fuel Weight Calculation -
Fuel On Board Sync Softkey
(sets FOB to sensor actual)
Fuel Weight Calculator
- Zero Fuel Weight Calculation
- Fuel on Board Entry (or sync)
- Aircraft Weight Calculation
- Estimated Landing Weight Calculation
- Estimated Landing Fuel Calculation
- Fuel Reserve Entry
- Excess Fuel Calculation
Empty Weight Softkey
(selects Basic Empty Weight)
Entering basic empty weight:
1) Select the EMPTY WT Softkey; or press the MENU Key, highlight ‘Set Basic Empty Weight’, and press the ENT
Key to select the ‘BASIC EMPTY WEIGHT’ field.
2) Turn the small FMS Knob to enter the basic empty weight.
3) Press the ENT Key to confirm the entry.
4) Press the FMS Knob to remove the flashing cursor.
Entering a pilot and stores weight:
1) Press the FMS Knob to activate the cursor and highlight the ‘PILOT AND STORES’ field.
2) Turn the small FMS Knob to enter the pilot and stores weight.
3) Press the ENT Key to confirm the entry.
4) Press the FMS Knob to remove the flashing cursor.
The basic operating weight is calculated by adding the basic empty weight and the pilot and stores weight.
Entering the number of passengers:
1) Press the FMS Knob to activate the cursor and highlight the ‘PASSENGERS #’ field.