Filter
Top Products
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
43
SYSTEM OVERVIEW
Pilot Profiles
Various system settings may be saved under a pilot profile. When the system is powered on, the last
selected pilot profile is shown on the MFD power-up screen (Figure 1-19). The system can store up to 25
profiles; the currently active profile, the amount of memory used, and the amount of memory available are
shown at the top of the System Setup Page in the box labeled ‘PILOT PROFILE’. From here, pilot profiles
may be created, selected, renamed, or deleted. Pilot profiles may also be imported from an SD card, or
exported to an SD card.
Figure 1-36 Pilot Profiles (System Setup Page)
System settings on the AUX-System Setup Page that are pilot adjustable are saved to the pilot profile, as
well as, but not limited to, the following:
•Altimeterunitssetting
•Mapsettings
•SBASsettings
•Chartsettings
•HSIandwinddisplaysettings
•SVSoptions
Creating a profile:
1) Use the FMS Knob to select the AUX - System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight ‘CREATE’ in the Pilot Prole Box.
4) Press the ENT Key. A ‘Create Profile’ window is displayed.
5) Use the FMS Knob to enter a profile name up to 16 characters long and press the ENT Key. Pilot profile names
cannot begin with a blank as the first letter.
6) In the next field, use the small FMS Knob to select the desired settings upon which to base the new profile.
Profiles can be created based on Garmin factory defaults, default profile settings (initially based on Garmin
factory defaults unless edited by the pilot), or current system settings.