Garmin Flight Deck 100 Marine Instruments User Manual


 
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
173
FLIGHT MANAGEMENT
•Activeightplanleg(e.g.,‘D->KICT’or‘KIXD->
KCOS’) or ight plan annunciations (e.g., ‘Turn
right to 021˚ in 8 seconds’)
•Distance (DIS) and Bearing (BRG) to the next
waypoint orightplanannunciations(e.g.,‘TOD
within 1 minute’)
The symbols used in the PFD status bar are:
Symbol Description
Active Leg
Direct-to
Right Procedure Turn
Left Procedure Turn
Right Holding Pattern
Left Holding Pattern
Vector to Final
Right DME Arc
Left DME Arc
The Navigation Status Box located at the top of the
MFD contains four data fields, each displaying one of
the following items:
•Bearing(BRG)
•Distance(DIS)
•DesiredTrack(DTK)
•Endurance(END)
•EnrouteSafeAltitude(ESA)
•EstimatedTimeofArrival(ETA)
•EstimatedTimeEnroute(ETE)
•FuelonBoard(FOB)
•FueloverDestination(FOD)
•GroundSpeed(GS)
•MinimumSafeAltitude(MSA)
•TrueAirSpeed(TAS)
•TrackAngleError(TKE)
•Track(TRK)
•VerticalSpeedRequired(VSR)
•CrosstrackError(XTK)
MFD Navigation Status Box
The navigation information displayed in the four data fields can be selected on the MFD Data Bar Fields Box
ontheAUX-SystemSetupPage.Thedefaultselections(inorderlefttoright)areGS,DTK,TRK,andETE.
Changing a field in the MFD Navigation Status Box:
1) Select the System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the desired field number in the MFD Data Bar Fields Box.
4) Turn the small FMS Knob to display and scroll through the data options list.
5) Select the desired data.
6) Press the ENT Key. Selecting the DFLTS Softkey returns all fields to the default setting.