Garmin Flight Deck 100 Marine Instruments User Manual


 
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
69
FLIGHT INSTRUMENTS
Selecting the altimeter barometric pressure setting:
Turn the BARO Knob to select the desired setting.
Selecting standard barometric pressure (29.92 in Hg):
Press the BARO Knob to select standard pressure.
Or:
1) Press the PFD Softkey to display the second-level softkeys.
2) Press the STD BARO Softkey; STD BARO is displayed in barometric setting box.
Figure 2-11 Standard Barometric Altimeter Setting
IfthebarometricaltimetersettingsdifferbetweenPFDsbymorethan0.02inHg,thereadoutsturnyellow.
Oncethesettingsaresynchronized(BAROturnedon),theyremainsynchronizeduntilthesettingisturned
off.
Synchronizing the altimeter barometric pressure settings:
1) Select the AUX - System Setup Page using the FMS Knob.
2) Press the FMS Knob to activate the cursor.
3) Turn the
large FMS
Knob to highlight Baro in the Synchronization box.
4) Turn the
small FMS
Knob clockwise to ON or counterclockwise to OFF.
5) Press the
FMS
Knob to remove the cursor.
Figure 2-12 Baro Sync Setting
(AUX - System Setup Page)
Barometric Settings
not Synchronized on PFD
Displayed in Yellow