190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
14
SYSTEM OVERVIEW
5
COM3 MIC
– Selects the #3 transmitter (HF) for transmitting. COM3 receive is simultaneously selected
when this key is pressed allowing received audio from the #3 COM receiver to be heard.
6
COM3
– When selected, audio from the #3 COM receiver (HF) can be heard.
7
PA
– Selects the passenger address system. The selected Com transmitter is deselected when the PA Key
is pressed.
8
TEL
– When selected, activates the SATCOM transceiver.
9
MUSIC
– Turns the Music 1 input on or off.
10
SPKR
– Pressing this key selects and deselects the corresponding cockpit speaker. Com and Nav receiver
audio will be heard on the speaker.
11
MKR/MUTE
– Mutes the currently received Marker Beacon Receiver audio. Unmutes when new marker
beacon audio is received.
12
HI SENS
– Press to increase Marker Beacon Receiver sensitivity. Press again to return to normal.
13
DME
– Pressing turns DME audio on or off.
14
NAV1
– When selected, audio from the #1 Nav receiver can be heard.
15
ADF
– Pressing turns on or off the audio from the ADF receiver, if installed.
16
NAV2
– When selected, audio from the #2 Nav receiver can be heard.
17
AUX
– Turns optional DME 2 audio on or off.
18
MAN SQ
– Pressing activates/deactivates intercom manual squelch operation.
19
PLAY
– Press once to play the last recorded audio.
Press during play to play the previously recorded memory
block. Each subsequent press of the PLAY Key will begin playing the next previously recorded block.
20
INTR COM
– Pressing selects/deselects the pilot/copilot intercom on both audio panels.
21
CABIN
– Pressing activates/deactivates two-way communication between pilot/copilot and passengers.
22
ICS Knob
– Turn to adjust intercom volume or squelch. Press to switch between volume and squelch
control as indicated by the ‘VOL’ or ‘SQ’ being illuminated. The MAN SQ Key must be selected to allow
squelch adjustment.
23
MSTR Knob
– The Master Volume Control adjusts volume for the blended NAV, COM, and intercom
audio.
24
Reversionary Mode Button
– Pressing manually selects Reversionary Mode.