Garmin Flight Deck 100 Marine Instruments User Manual


 
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
425
HAZARD AVOIDANCE
TRAFFIC MAP PAGE
TheMap-TrafcMapPageshowssurroundingtrafcdatainrelationtotheaircraft’scurrentpositionand
altitude,withoutbasemapclutter.ItistheprincipalmappageforviewingTCASItrafcinformation.Aircraft
orientationisalwaysheadingupunlessthereisnovalidheading.MaprangeisadjustablewiththeRANGE
Knobfrom2to40nm,asindicatedbythemaprangerings.
Thetrafcmodeandaltitudedisplaymodeareannunciatedintheupperleftcornerofthepage.
Figure 6-117 Traffic Map Page
Operating
Mode
Altitude
Mode
Proximity Traffic,
900’ Above,
Level, Flight ID
Displayed
“No Bearing”
Traffic (Bearing
Undetermined),
Distance 4.0
nm, 500’ Above,
Descending
Traffic
Advisory Off-
Scale, 400’
Below, Level
Traffic Display
Range
Traffic Advisory,
500’ Below,
Climbing
Non-Threat
Traffic,
Altitude Not
Reported
Non-Threat
Traffic, 2500’
Above,
Descending
Displaying traffic on the Traffic Map Page:
1) Turn the large
FMS
Knob to select the Map Page Group.
2) Turn the small
FMS
Knob
to select the Traffic Map Page.
3) Select the OPERATE Softkey to begin displaying traffic. ‘OPERATING’ is displayed in the Traffic mode field.
4) Select the STANDBY Softkey to place the system in the Standby mode. ‘STANDBY’ is displayed in the Traffic
mode field.
5) Turn the RANGE Knob clockwise to display a larger area or counter-clockwise to display a smaller area.