Garmin Flight Deck 100 Marine Instruments User Manual


  Open as PDF
of 688
 
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
47
SYSTEM OVERVIEW
Setting the system time format:
1) While on the System Setup Page, press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight the time format eld in the Date/Time Box.
3) Turn the small FMS Knob to select the desired system time format (local 12hr, local 24hr, UTC) and press the
ENT Key.
Setting the current time offset:
1) While on the System Setup Page, press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight the time offset eld in the Date/Time Box.
3) Enter the time offset and press the ENT Key.
DisPlay Units
The Display Units Box on the System Setup Page shows the configured units of measure used for each
category. Only the NAV ANGLE, ALT,VS, and POSITION are pilot selectable. The following indicates the
system parameters affected by changes within that category.
•Navangle(magnetic,true)
When set to ‘MAGNETIC’, magnetic variation is figured into the displayed value. When ‘TRUE’ is
selected, no magnetic variation is calculated and a ‘T’ is displayed next to the value.
Affects the BRG field in the PFD Navigation Status Box.
Affects Current Heading, Selected Heading, and Selected Course boxes on the PFD.
Affects the BRG, DTK, TKE, TRK, and XTK fields in the MFD Navigation Status Box.
•Altitudeandverticalspeed(feet,meters)
Affects all altitude and elevation displays on the MFD, with the exception of VNV altitudes on the
Active Flight Plan Page.
•Position(HDDD°MM.MM’,HDDD°MM’SS.S”)
Affects all position displays.
To change a Display Units setting:
1) While on the System Setup Page, press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight the desired eld in the Display Units Box.
3) Turn the small FMS Knob to select from a list of measurement units and press the ENT Key when the desired
unit is highlighted. Press the CLR Key to cancel the action without changing the units.
Baro transition alert
See the Flight Instruments section for a discussion on setting the Baro Transition Alert.
 previous next