Garmin Flight Deck 100 Marine Instruments User Manual


 
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
157
AUDIO PANEL AND CNS
ENTERING A TRANSPONDER CODE
Entering a transponder code with softkeys:
1) Select the
XPDR
Softkey (or
XPDR/TFC
Softkey with optional TCAS II) to display the
CODE
Softkey.
2) Select the
CODE
Softkey to display the Transponder Code Selection Softkeys, for digit entry.
3) Select the digit softkeys to enter the code in the code field. When entering the code, the next softkey in sequence
must be selected within 10 seconds, or the entry is cancelled and restored to the previous code. Selecting the
BKSP Softkey moves the code selection cursor to the previous digit. Five seconds after the fourth digit has been
entered, the transponder code becomes active.
Entering
a Code
Figure 4-44 Entering a Code
Entering a transponder code with the PFD FMS Knob:
1) Select the
XPDR
Softkey (or
XPDR/TFC
Softkey with optional TCAS II) to display the
CODE
Softkey.
2) Select the
CODE
Softkey.
3) Turn the small FMS Knob on the PFD to enter the first two code digits.
4) Turn the large FMS Knob to move the cursor to the next code field.
5) Enter the last two code digits with the small FMS Knob.
6) Press the
ENT
Key to complete code digit entry.
Pressing the CLR Key or small FMS Knob before code entry is complete cancels code entry and restores the
previouscode.Waitingfor10secondsaftercodeentryisnishedactivatesthecodeautomatically.
Figure 4-45 Entering a Code with the FMS Knob
Press the
ENT
Key to
Complete
Code Entry
Turn the Large
FMS
Knob
to Move the
Cursor to the
Next Code Field
Turn the Small
FMS
Knob to
Enter Two Code
Digits at a Time