Garmin Flight Deck 100 Marine Instruments User Manual


 
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
159
AUDIO PANEL AND CNS
FLIGHT ID REPORTING
NOTE: If the Flight ID is required but the system is not configured for it, contact a Garmin-authorized service
center for configuration.
WhentheFlightIDmustbeenteredbeforeightoperation,theidentierisplacedintheTimer/References
WindowonthePFD.TheFlightIDcanbeuptoeightcharacters.NospaceisneededwhenenteringFlight
ID.WhenaFlightIDcontainsaspace,thesystemautomaticallyremovesituponcompletionofFlightIDentry.
TheFlightIDisalsodisplayedontheSystem-StatusPage.
Entering a Flight ID:
1) Select the TMR/REF Softkey to display the Timer/References Window.
2) Press the FMS Knob to activate the selection cursor, if not already activated.
3) Turn the large FMS Knob to scroll down to the Flight ID.
4) Turn the small FMS Knob to enter the desired Flight ID.
5) Press the ENT Key to complete Flight ID entry. The word “updating” appears until the new entry is completed.
IfanerrorismadeduringFlightIDentry,pressingtheCLRKeyreturnstotheoriginalFlightIDentry.While
enteringaFlightID,turningtheFMS Knob counterclockwise moves the cursor back one space for each detent
ofrotation.IfanincorrectFlightIDisdiscoveredaftertheunitbeginsoperation,reenterthecorrectFlightID
using the same procedure.
Figure 4-48 Timer/References Window, Entering Flight ID
Flight ID
PFD Entry